Spid Settings For Customers In The Usa And Canada - Sony Ipela PCS-XG80 Operating Instructions Manual

A1: Port 1 on the ISDN unit.
A2: Port 1 on the ISDN unit.
B1: Port 2 on the ISDN unit.
B2: Port 2 on the ISDN unit.
C1: Port 3 on the ISDN unit.
C2: Port 3 on the ISDN unit.
Area Code
Enter the area code of the ISDN line to be
used. Do not enter the first 0 of the area code.
Local Number
Enter the line number (local number) of the
ISDN line to be used.
ISDN4
Sub Address
The A1 to C2 fields appear.
Sub Address
Enter sub-addresses when registering them.
Sub-addresses can only be composed of
numbers.
ISDN6
SPID
The SPID (Service Profile Identifier) pages
are used only for customers in the USA and
Canada.
For details, see "SPID Settings for
Customers in the USA and Canada" on page
68.
SPID
Enter SPID (Service Profile Identifier).
Auto SPID
When you select "Auto SPID", you can
automatically set up the Area Code and
Local Number on the Telephone Number
page and SPID items.
Notes
• When you select an empty field and then
press the ENTER button of the Remote
Commander, the setting of the previous field
is copied into the selected field.
• When using the PCSA-B768S ISDN Unit,
selecting the ISDN3, ISDN5 or ISDN7
button displays the D1 to F2 text boxes. Fill
in the D1 to F2 text boxes according to the
lines that you are using.
68
Registering Local Information
SPID Settings for Customers
in the USA and Canada
If you connect to an ISDN switch type,
configuration of SPID (Service Profile
Identifier) is required.
If "Auto SPID" is not available in your area,
set up SPID manually using the ISDN Setup
menu.
1
Open the Basic Setup page of the
ISDN setup menu.
2
Enter the country code in the Country/
Region Code text box depending on
the network switch type you are using.
AT&T 5ESS (National ISDN), NTI
DMS-100 (National ISDN): Enter "1".
AT&T 5ESS (Point-to-Point Custom
ISDN): Enter "1*12".
NTI DMS-100 (Custom ISDN): Enter
"1*11".
3
Open the Telephone Number page to
enter the LDN (Local Directory
Number) in the Local Number text
boxes.
When you use the AT&T 5ESS
(Point-to-Point Custom ISDN)
switch type
Enter the same LDNs in the A1 and
A2 (B1 and B2, C1 and C2, depending
on the number of lines you use) text
boxes.
When you use the NTI DMS-100
(National ISDN) or NTI DMS-100
(Custom ISDN) switch type
Enter the different LDNs in the A1
and A2 (B1 and B2, C1 and C2,
depending on the number of lines you
use) text boxes. These switch types are
given a separate number for each
channel.
When you use the AT&T 5ESS
(National ISDN) switch type
You may enter the same or different
numbers in two channels.