To cancel dialing before connecting
While "Dialing" is displayed on the monitor screen, press the ENTER button
or the DISCONNECT
) button on the Remote Commander.
To save the entered IP address or ISDN telephone number in the
When you enter the IP address or ISDN telephone number, the Save button
appears at the lower part of the menu.
Select "Save" with the V, v, B or b button, then press the ENTER button on
the Remote Commander. The List Edit menu is displayed. Save the address or
number you entered into the Phone Book.
For details on the List Edit menu, see "Registering a Remote Party – Phone
Book" on page 102.
Once you have input the IP address or ISDN telephone number using the
Detailed Dial menu, it will be entered in the text box of the Detailed Dial menu
the next time you open the menu.
The redial function is not available:
• Once you have turned off the power of the system or set it to standby mode.
• When you cancel dialing the entered IP address or ISDN telephone number.
Starting a Connection by Calling a Remote Party