Appendix; Location And Function Of Parts And Controls; Pcs-Xg80S Hd Visual Communication System - Sony Ipela PCS-XG80 Operating Instructions Manual

3

Appendix

Location and
Function of Parts
and Controls
PCS-XG80S HD Visual
Communication System
Front
1 234
/ LAN 1 ALERT LAN 2 ALERT
VIDEO IN
Y Pb Pr
7
a
? / 1 (power) switch
Turns on/off the system.
b
? / 1 (power) indicator
Starts blinking in green when the power
switch is pressed to on, then lights in
green. Lights in orange when the system
is set to standby mode.
c LAN 1 ALERT indicator
When the system is connected to LAN
via the 1 connector on the rear, this
indicator lights in yellow when packet
error (loss) or link error occurs during
communication.
d LAN 2 ALERT indicator
Not used with the System of this version.
e TABLET connector
172

Location and Function of Parts and Controls

5 6
OPEN
OPEN
AUDIO 2 IN
L R MAINTENANCE
8 9
Connect to a pen tablet (not supplied) for
annotation, or the Key Module (not
supplied) for software installation.
f Memory Stick slot
Insert a "Memory Stick" (not supplied)
into this slot.
A "Memory Stick Duo" can also be
inserted.
g VIDEO IN YPbPr (component
input) jacks (phono jack)
Connect to the component (YPbPr)
signal outputs of the optional camera or
external video equipment.
h AUDIO 2 IN L/R jacks (phono jack)
Connect to the audio outputs of the
optional camera or audio equipment.
i MAINTENANCE connector (D-sub
9-pin)
Used for maintenance service.