Viewing The Picture From The System On A Monitor Or Projector - Sony Ipela PCS-G60 Operating Instructions Manual

Viewing the Picture from the System on
a Monitor or Projector
When the monitor or projector is connected to the Communication System,
you can view the picture from the system.
To connect a monitor or projector
TERMINAL
CAMERA RGB IN RGB OUT
MIC(A1/A3)
1(R) 2(L)
R L R
(PLUG IN POWER) AUDIO OUT REC OUT
to RGB
OUT
To use the connected display equipment
When outputting the picture both to the monitor connected to the HDMI OUT
connector and the display equipment connected to the RGB OUT connector,
set "Monitor Output" to "HDMI+RGB" on the Basic Setup page of the Video
setup menu (page 67).
For RGB output, you can select the video format of the signal output from the
RGB OUT connector with "RGB Monitor Output Format". You can select
"SXGA", "XGA" or "WXGA" (page 67).
Notes
• The HDMI output is available only when the output signal is of 1080i video format.
• If "Monitor Output" is set to "HDMI+RGB" when no HDMI monitor is connected to
the Communication System, you cannot view the menus. Before making this setting,
be sure to connect an HDMI monitor.
VISCA OUT
to HDMI OUT
HDMI OUT ISDN UNIT AUX CONTROL
L DC 19.5V
Connecting cable with D-sub 15-pin
connectors

Viewing the Picture from the System on a Monitor or Projector

Monitor
to HDMI IN
HDMI cable
Monitor,
(supplied)
projector, etc.
to RGB IN
163