Displaying The Picture On A Projector Or Monitor; Outputting The Signal To One Monitor - Sony IPELA PCS-G70 Operating Instructions Manual

Displaying the Picture on a Projector or
Monitor
When you connect the Data Solution Box to the Communication Terminal,
connections with external monitors, etc. using the following four outputs are
available. The connections allow output of the picture to one, two or three
monitors selected from among four.
Monitor A
to VIDEO OUT
MONITOR 1
Monitor D

Outputting the Signal to One Monitor

Select the output with "Connection" under "Monitor Out" in the Video Setup
menu.
VIDEO 1: Outputs the signal to the monitor (monitor A in the illustration
above) connected to the VIDEO OUT MONITOR 1 connector of the
Communication Terminal.
RGB: Outputs the signal to the monitor (monitor C in the illustration above)
connected to the RGB OUT connector of the Communication Terminal.
DSB: Outputs the signal to a monitor (monitor D in the illustration above)
connected to the RGB OUT connector of the Data Solution Box.
to RGB OUT on the
PCSA-DSB1S

Displaying the Picture on a Projector or Monitor

Monitor B
to VIDEO OUT
MONITOR 2
to RGB OUT
Monitor C
189