Displaying The Picture On A Projector Or Monitor; Monitor - Sony PCS-1/1P Operating Instructions Manual

Displaying the Picture on a Projector or

Monitor

When you connect the Data Solution Box to the Communication Terminal,
connections with external monitors, etc. using the following four outputs are
available. The connections allow output of the picture to one or two monitors
selected from among four.
Monitor A
to VIDEO OUT
MONITOR
Monitor D
Outputting the Signal to One Monitor
This setting is available when "Dual Monitor" is set to "Off" in the General
Setup menu. Select the output using "Monitor Out" setting in the General
Setup menu.
VIDEO OUT: Outputs the signal to a monitor (Monitor A in the illustration
above) connected to the VIDEO OUT MONITOR MAIN connector on the
Communication Terminal.
RGB OUT: Outputs the signal to a monitor (Monitor C in the illustration
above) connected to the RGB OUT connector on the Communication
Terminal.
142

Displaying the Picture on a Projector or Monitor

MAIN
ON LINE
to RGB OUT on the
PCS-DSB1
to VIDEO OUT
MONITOR
SUB
POWER LAN ALERT
to RGB OUT
Monitor B
Monitor C