Deleting A Batch - Monarch 9400 Series Operator's Handbook Manual

If you want to re-enter a canceled batch in the queue, press
D
. When you see the batch you canceled (which shows a
status of C), press
Reprint [Y/N]: N
Batch: NAME
To re-enter the batch into the print queue, type Y and press
E
. You'll see the Batch Control menu.
If there are other batches you don't want to print, you must
delete them from the queue. The process is similar to
canceling a batch. For more information on deleting a batch,
see the next section.
To exit Batch Control, press
Printing resumes automatically.

Deleting a Batch

You can only delete a batch which has a print status of Q.
From the main menu press
Control, and press
message
WARNING
Printing suspended until exit.__
Then, you'll see
Batch Control Mode
Select Batch: NAME
E
. You'll see
!
after making your selections.
U D
or
E
. The screen briefly displays the
(batch control)
3. Monitoring Batch Printing
until you see Batch
Q__
3-3