Using Skip Index - Monarch 9855 Operator's Handbook Manual

U s i n g S k i p I n d e x
You can use the skip index mode to skip (or ignore) a sense mark and print
an image over multiple labels, if necessary. For example, if you have 4.0"
long supplies loaded, but your image is 8.0" long, enable skip index mode to
print the 8.0" long image on two labels. The image length is determined by
the format header. See your System Administrator or the optional Packet
Reference Manual for more information. The skip index feature is useful
when you have a single format that contains two labels, such as a shelf
label and a carton label.
Note: When designing the format, make sure text or graphics do not print
in the gap of label rolls.
To change the setting, from the Main menu, select Setup, then Supply.
1. Press  or  until you see
SUPPLY

Skip Index
2. Press Enter/Pause to set the skip index mode. You will see the current
setting, for example:
SKIP INDEX
No
3. Press  or  to see the other options. After you display the option you
want, press Enter/Pause. Press Escape/Clear until you see the Main
Menu.
4-16 Operator's Handbook
