Hardware Installations and Upgrades
2. Remove the module out of the server system (see letter B).
Installing and Removing the Intel
Installing the Intel
1. Connect the cable between the BBU and the RAID card. For details, see Intel
Battery User's Guide.
2. Locate the BBU bracket inside the chassis. Align the tabs on the plastic battery holder with
mounting holes on the BBU bracket (see letter A).
3. Slide the plastic battery holder toward the rear of the system until the tabs engage with the
mounting holes in the BBU bracket (see letter B).
36
Figure 61. Removing the Intel
®
RAID Smart Battery
Figure 62. Installing the Intel
®
RMM4 NIC
®
RAID Smart Battery
®
RAID Smart Battery
®®
Intel
Server System R1000SP Service Guide
®
RAID Smart