Parameter File Creator - NEC Express5800/R320a-E4 User Manual

5-6 Installing and Using Utilities

PARAMETER FILE CREATOR

"Parameter File Creator" is a tool to create [Parameters file] that is used for configuring the server
with the Express Setup (see Chapter 4 of the User's Guide (setup) for details).
If you use the Parameters file created by the Express Setup and Parameter File Creator to operate
the setup, you can setup from the installation of OS to several utilities automatically except for a
few key input to verify the specification. Also, you can install the system with the same
specification as before when re-installing the system. We recommend you to create [Parameters file]
to setup the servers from NEC EXPRESSBUILDER.
When using a floppy disk, a USB floppy disk drive is required.
IMPORTANT:
You can create [Parameters file] for Windows Server 2008 R2.
The setup using a parameter file saved in the Flash FDD is not supported.
NOTE:
You can install Windows Server 2008 R2 without [Parameters file]. Also, you can
modify/newly create [Parameters file] during the setup with NEC EXPRESSBUILDER.