NEC Express5800/R320a-E4 User Manual page 241

Procedure in ft server utility
Save the image data of the update firmware in a desired directory of the NEC
1.
Express5800/ft series.
Save the image data in some manner. Write down the path to the directory in which the
image data is saved.
Select the target component with the ft server utility.
2.
Check the current state of the target component with the LEDs. If the component is
3.
operating, stop the component.
Click the [Firmware...] button for the target component.
4.
Sample screen of ft server utility
Installing and Using Utilities 5-81
[CPU Module]