NEC Express5800/R320a-E4 User Manual page 200

Hide thumbs Also See for Express5800/R320a-E4:
Table of Contents

Advertisement

5-40 Installing and Using Utilities
while the disks are mirrored. Temperature or voltage error occurring during disk mirroring will
result in the system to shut down.
CPU Information of the [ft] Tree
If you select [CPU Module] – [CPU] in the [ft] tree of the DataViewer, unknown or incorrect
information appears in some information items.
The CPU information can be viewed by selecting [System] – [CPU] in the [ESMPRO] tree.
When [ft] Tree Appears on Date Viewer in an Incorrect Manner
If you open a DataViewer immediately after the system starts up, the tree or the state of a
DataViewer may not be displayed correctly due to high load of the system. In about 20 minutes after
the system startup, when a pop-up message (below) which prompts you to reconstruct a DataViewer
appears, click [OK]. The DataViewer will be reconstructed and the tree and the status will be
displayed correctly.
DataViewer
The system configuration of the host may have been changed. Do you wish to reconstruct the
tree?
Floppy Disk Drive Name
After unplugging and plugging the PCI module of the primary side, the floppy disk drive name of
[I/O Device] on DataViewer may be different from the name that is recognized by the OS.
(Example: drive name on DataViewer: "A"
Check the floppy disk drive name on Explorer.
Ethernet Adapters You Do Not Use
If an Ethernet adapter is not used (not connected to cable), set it to "Disable" in [Network
Connections] from Control Panel. If an Ethernet adapter you are about to disable has dual LAN
settings (AFT function), remove the dual LAN settings before disable it.
DataViewer display when only one of the PCI modules (IO modules) is operating
When only one of the PCI modules (IO modules) is operating (non-dual configuration), the SCSI
enclosure or mirror disk status cannot be displayed normally.
To check if the dual configuration is changed to the simplex operation mode, check the event log,
AlertViewer log, or the status color of PCI module of DataViewer.
drive name recognized by the OS: "B")

Advertisement

Table of Contents
loading

Table of Contents