NEC Express5800/R320a-E4 User Manual page 211

Monitoring SCSI adapter on PCI module
To monitor the SCSI adapters on the PCI modules, see the [SCSI adapter] tree. To see the
information on the [SCSI adapter] tree, select [PCI Module]→[PCI module (connected to SCSI
adapter to be seen)]→[SCSI adapter] of the [ft] tree.
You can see the following information on the SCSI adapters in the [SCSI adapter] tree. This
function is not supported in the current version.
General
Allows the SCSI configuration information to be viewed. This function is not supported in
the current version.
Maintenance
Allows the MTBF information of SCSI adapters to be viewed and cleared. This function
is not supported in the current version.
Update
Allows the firmware of SCSI adapters to be updated. This function is not supported in the
current version.
SCSI bus
Allows the information on the SCSI bus connected to SCSI adapters and devices to be
viewed. This function is not supported in the current version.
Monitoring Ethernet adapter on PCI module
To monitor the Ethernet adapters on the PCI modules, see the [Ethernet Board] tree. To see the
information on the [Ethernet Board] tree, select [PCI Module]→[PCI module (connected to the
Ethernet adapter to be seen)]→[Ethernet Board] of the [ft] tree. You can see the following
information on the Ethernet adapters in the [Ethernet Board] tree.
IMPORTANT:
Disable the unused Ethernet adapter (that is not connected to cables) by using [Network
Connection] in Control Panel. However, if the Ethernet adapter to be disabled is set to dual LAN
configuration (AFT feature), disable it after removing dual LAN configuration. If it is not disabled
and the cable is not connected to it, NEC ESMPRO Agent determines that the port is faulty (does
not have any media), and the status color of [ft] - [PCI module] - [Ethernet Board] of the
DataViewer turns red (abnormal). The server status color of the integrated viewer also turns red
(abnormal).
General
This function is not supported in the current version.
Detail
This function is not supported in the current version.
Maintenance
This function is not supported in the current version.
Installing and Using Utilities 5-51