NEC Express5800/R320a-E4 User Manual page 314

5-154 Installing and Using Utilities
IMPORTANT:
- Before connecting to the Upgrade Side from the Production Side by using Remote Desktop or
Remote KVM, you need to complete the Split operation appropriately and check no error is
output on the activity log. If Remote Desktop or Remote KVM is used during the Split
operation, the connection may fail. If this occurs, retry the connection after the Split.
- Active Upgrade Console that appears on the Upgrade Side is just for monitoring the status such
as [Remote Activity Log] under [Active Upgrade Operation Check] – [Activity Log] in many
cases. However, the Active Upgrade Console looks like the console of the Production Side in
some cases. In such a case, you need to care following issues.
- Never select any buttons (such as [Abort] or [Merge]) or any links (such as [Remote Desktop])
on the Active Upgrade Console of the Upgrade Side when in split mode. If you inappropriately
select any of them, you may face an error or will not be able to refer to the data drive after the
merge is completed. When this kind of trouble occurs, you need to take following procedures.
- When operation is unavailable because of the error, execute the same operation again from the
Active Upgrade Console of the Production Side.
- When the data drive cannot be referred to the merge status, select [Retry] button and execute
merge operation again. If you can't refer data drive after retrying the merge, select [Abort]
button to exit the Active Upgrade, then again execute the Active Upgrade.
Connecting to the Upgrade Side with Remote KVM
Connecting to the Upgrade Side with Remote KVM allows you to control the keyboard, video, and
mouse of the Upgrade Side using the BMC remote console feature.
To initiate a Remote KVM session with the Upgrade Side
IMPORTANT:
When you use Remote KVM session, you need to prepare the setting of the Remote KVM before
starting the Active Upgrade. Refer to [Chapter 4 System Configuration] – [Remote Management
Function] for the Remote KVM settings.
1. Click [Remote KVM] on the navigation bar of the Active Upgrade
console on the Production Side.
2. If a warning indicating that the Web site is being blocked is displayed, click Add. In the [Trusted
Sites] dialog box, add the Web site to the Trusted Sites. If a warning is displayed when adding to