Parameter File Creator - NEC Express5800/R120b-2 User Manual

Hide thumbs Also See for Express5800/R120b-2:

Table of Contents

6-8 Installing and Using Utilities

PARAMETER FILE CREATOR

"Parameter File Creator" is a tool to create [Parameter file] that is used for configuring the server

with the Express Setup (see Chapter 5 for details).

If you use the Parameter file created by the Express Setup and Parameter File Creator to operate the

setup, you can setup from the installation of OS to several utilities automatically except for a few

key input to confirm the specification. Also, you can install the system with the same specification

as before when re-installing the system. We recommend you to create [Parameter file] to setup the

servers from NEC EXPRESSBUILDER.

When using a floppy disk, a USB floppy disk drive is required.

You cannot create [Parameter file] for Microsoft Windows Server

2003 x64 Editions.

The setup using a parameter file saved in the Flash FDD is not

NOTE: You can install Windows Server 2008 R2/Windows Server

2008/Windows Server 2003 without [Parameter file].

Also, you can modify/newly create [Parameter file] during the setup

with NEC EXPRESSBUILDER.