NEC Express5800/R320a-E4 User Manual page 78

3-8 Windows Setup and Operation
IMPORTANT:
If RDR is specified to a disk which contains the system partition or partition which cannot
be unmounted, the system restart pop-up message appears. If you click [Yes], the system is
restarted in two minutes automatically. Go on to 5. when the system is restarted.
Insert a disk to set duplex configuration into the corresponding slot.
5.
(In this example, a disk is inserted into the Slot 1 of the PCI module 11.)
IMPORTANT:
When a disk is inserted, a popup window asking for rebooting the system may be
displayed, but there is no need to reboot it. Select [Restart Later] and close the
popup window.
For a disk to be inserted, use a new or physically formatted disk which has the
same capacity as the synchronization source. If such a disk is not used, disks are
not duplicated successfully.
As for physical format, refer to "SAS BIOS – SAS Configuration Utility –s" in
Chapter 4, "System Configuration" in the separate volume of the User's Guide, and
perform Format Disk with Disk Utilities.
Before performing physical formatting, change [Option ROM Scan Monitoring] as
[Disabled] on [Server] – [Monitoring Configuration] on the BIOS setup utility.
Refer to the separate volume of the User's Guide User's Guide "SYSTEM BIOS –
SETUP –" in "Chapter 4 System Configuration" for configuration.