NEC Express5800/R320a-E4 User Manual page 202

5-42 Installing and Using Utilities
Display of ft server utility
It is correct under the control of CPU module, the PCI module, and SCSI Enclosure because it is
not constructed and may not be able to display data immediately after the system starts.
If the display is not corrected after a while, the fault-tolerant server utility is reactivated.
Monitoring under Sleep Mode
When NEC ESMPRO Agent is in sleep mode (system standby or system hibernation), NEC
ESMPRO Agent in sleep mode cannot be monitored from NEC ESMPRO Manager.
When server failure monitoring is performed from NEC ESMPRO Manager and the applicable NEC
ESMPRO Agent is put into sleep mode, the "No response from the server." message is reported, the
status color of the server icon turns gray, and NEC ESMPRO Manager fails to judge whether NEC
ESMPRO Agent fails or is put into sleep mode. Keep this in mind if you operate the monitoring
target system with the setting that allows the system to enter sleep mode.
Logic Revision
For one [CPU Module] under [CPU Module] in the [ft] tree of NEC ESMPRO Manager, Logic
Revision in [General] is displayed as "Unknown".
DataViewer Display of an Unmounted Sensor
For R320a-E4/ R320b-M4, an unmounted sensor is grayed out on the DataViewer.
Example:
Temperature information
Location
Temperature
Threshold
Status
.
: DIMM2 Temp#0
: Unknown
: Disabled
: Unknown