NEC Express5800/R320a-E4 User Manual page 217

Monitoring Hard Disk Drive (HDD)
To monitor the hard disks and detect disk failures at an early stage, use the NEC ESMPRO Manager
and NEC ESMPRO Agent. You can see configurations and information of hard disk in the
DataViewer.
Monitoring HDD Operations
This section describes how to maintain hard disk drives.
Verification of HDD failure
1.
If NEC ESMPRO Agent detects some problem with a HDD, it will report an alert of the
problem to NEC ESMPRO Manager. Please check the AlertViewer in the manager
regularly.
Ex. If a HDD in SCSI Slot (10/40/1) is broken, NEC ESMPRO Agent reports the
following alert.
Device 10/40/1 is now BROKEN.
And manager displays the problem information of the hard disk in the [SCSI enclosure]
→ [SCSI Slot] → [General] of the DataViewer.
[SCSI Slot] → [General]
Installing and Using Utilities 5-57