NEC Express5800/R320a-E4 User Manual page 82

3-12 Windows Setup and Operation
Removing duplex configuration of RDR disks
This section describes how to remove duplex configuration from the disk with RDR setting.
In the example below, the duplication setting of the disks in the Slot 1 of the PCI modules 10 and 11
is removed.
IMPORTANT:
After executing the command, RDR settings will be cancelled but other data will remain.
Do not release the RDR setting of the system disk.
You cannot release the duplex setting of the dynamic disk.
The display of RDR Utility is not updated automatically. Therefore, update it every time you
check the status of disks by clicking [Refresh] from [Action] on the menu or pressing F5.
Start the RDR Utility, right-click a disk you want to cancel RDR from the tree in the left pane,
1.
and select [Delete RDR configuration on Physical Disk].