NEC Express5800/R320a-E4 User Manual page 239

Hide thumbs Also See for Express5800/R320a-E4:
Table of Contents

Advertisement

Select [Specify the file path to update], enter the directory in which the updated firmware
5.
specified in the input box in step 1 is saved, and click the [Execute] button.
Perform the firmware update.
The update result can be verified by the state on the target component screen (indication
of "Firmware update completed"). The result of the update processing is reported by the
NEC Express5800/ft series as an alert.
After the BIOS for a single CPU module is completed, click the [Jump Switch] button.
6.
The module completely updated is started and the active module is stopped.
Start the other module stopped.
7.
Starting the module causes the firmware to be updated automatically. However, if the
[Enable automatic firmware update] property is invalid, update the module in the
procedure as follows:
(1) Check the current state with the "State" display on the target component screen. If the
component is operating, stop the component.
(2) Click the [Firmware Update] button in the [Update] screen for the target component.
(3) Select the update method in the [Firmware Update] dialog box and click the [Execute]
button.
(4) Start the module.
Installing and Using Utilities 5-79

Advertisement

Table of Contents
loading

Table of Contents