NEC Express5800/R320a-E4 User Manual page 85

IMPORTANT:
Cancelled disk may not be displayed properly on [Disk Management] after the RDR is
cancelled. If this is the case, execute the following:
1. Exit [Disk Management].
2. Open [Computer Management] – [Service] and execute "Virtual Disk (vds)."
3. Open [Disk Management].
A partition on the disk where the RDR setting is removed is assigned an arbitrary drive letter
by the auto mount function of the OS. If you want to reassign the drive letter of the partition
properly, use [Disk Management].
If the disk contains a partition which cannot be unmounted, the OS needs to be restarted
when canceling RDR.
In that case, the system restart pop-up message appears. If you click [Yes], the OS is
restarted automatically after two minutes:
Other functions of RDR Utility
<Commands for physical disks>
Remove Physical Disk From RDR Virtual Disk
All data including RDR settings on a physical disk can be deleted.
IMPORTANT:
After executing the command, the physical disk becomes an empty basic disk without RDR
settings.
This command can only be executed to physical disks in Duplex/Syncing state.
Start RDR Utility and right-click a target disk on the tree in the left pane, and click [Remove
1.
Physical Disk from RDR Virtual Disk].
In the [Remove Physical Disk From RDR Virtual Disk] dialog box, click [Yes].
2.
In the [Remove Physical Disk From RDR Virtual Disk] dialog box, click [OK].
3.
Windows Setup and Operation 3-15