Event Log - NEC Express5800/R320a-E4 User Manual

Hide thumbs Also See for Express5800/R320a-E4:
Table of Contents

Advertisement

7-24 Troubleshooting

Event Log

The following system event of ACPI is logged
→ This event may be registered during the re-installation, it is not a problem in
operating the system.
Type
Source
Event ID
Description :ACPI BIOS does not contain an IRQ for the device in PCI slot 1,
VDS Basic Provider log is recorded in the system event log:
→ The following log may be recorded when starting Virtual Disk Service or setting
duplex of disks. This log is recorded because the virtual controller driver involved
in the disk duplex does not have path information properties, but there is no
problem with the system operation.
Source:
Type:
Event ID:
Description: Unexpected failure. Error code: 490@01010004
"The NMS Service terminated unexpectedly." is recorded in the system event log:
→ Although the following log may be recorded in the system event log when starting
the system, or after exchanging CPU/IO modules, there is no real problem on
operation. Change of a setup with PROSet II will become invalid if NMS service
stops, but you can change a setup normally because NMS service will be
automatically started when PROSet II is started.
"Source:
Event ID:
Description: The NMS service terminated unexpectedly. This has occurred 1
:Error
:ACPI
:6
function 0.
Please contact your system vendor for technical assistance.
VDS Basic Provider
Error
1
Service Control Manager
7031
time(s). The following corrective action will be taken in 0
milliseconds: No action."
.

Advertisement

Table of Contents
loading

Table of Contents