NEC Express5800/R320a-E4 User Manual page 385

Pop-up message of esmcmn.exe is displayed when starting the system:
→ The following pop-up message may be displayed when you restart the system which
NEC ESMPRO Agent is installed to and removal drives such as MO and
DVD-RAM are mounted on, without closing Windows Explorer, after displaying the
contents of media and removing the media by the software eject (by right-clicking
the DVD drive on Windows Explorer and selecting [Eject]) The message (the drive
name) displayed varies depeneding on the systems.
If the pop-up messages below are displayed, click [Cancel] or [Continue] to close
the dialog box. If you do not close the dialog box, you cannot start the Workstation
service and related services, causing unstable operation of the system. Also, if you
restart the system, execute it after terminating the program such as Windows
Explorer which displays a media.
<Example>
Memory dump (debug information) cannot be collected when a failure occurs:
Is there any available storage space on a storage location?
→
Specify the drive in which there is an available storage space of more than a
memory size on the server plus 12 MB (more than 2048 plus 12MB if a memory
size is more than 2GB).
For details, see "Set Memory Dump (Debug Information)" of "Step 12: Make
Settings for Failure Management" in Chapter 4 "Windows Setup" in the separate
User's Guide for setup.
Is [Initial size] of the paging file of the OS partition smaller than [Recommended]?
→
If a value smaller than the [Recommended] value is set for [Initial Size] of the
paging file, accurate memory dump (debug information) may not be collected. Be
sure to create the file in the above size in the OS partition.
For details, see "Set Memory Dump (Debug Information)" of "Step 12: Make
Settings for Failure Management" in Chapter 4 "Windows Setup" in the separate
User's Guide for setup.
Troubleshooting 7-19