NEC Express5800/R320a-E4 User Manual page 451
Hide thumbs
Also See for Express5800/R320a-E4:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
N8803-036 SCSI Board
The lists of slots to install optional PCI boards
Refer to the table "List of option PCI boards and installable slots" on page 8-32.
Driver installation procedure
TIPS:
To perform this procedure, you have to log on the system as an Administrator or a member of
the Administrators group.
1.
Mount N8803-036 SCSI board and start the system. When this launches, [New Hardware
Detected] window appear and the driver will be installed automatically. However, the
standard driver for the OS is not applicable on the ft server. Therefore, update the driver
with the following procedure.
2.
Insert the "NEC EXPRESSBUILDER" DVD into the DVD-ROM drive and run the
following command after starting the Command Prompt: Run the command below.
Optical disc drive:
¥003¥win¥has¥w2k8amd64¥HASSETUP¥SCSI¥UPDATE.VBS
Because following security dialog is displayed when executing a command, it clicks
[Install] and it continues the installation of the driver.
Do a system with the reboot if the installation ends.
System Upgrade 8-41
Advertisement
Table of Contents
Troubleshooting
