NEC Express5800/R320a-E4 User Manual page 450

8-40 System Upgrade
(1) Launch Device Manager
(2) Expand network adapter and double click Added NIC.
The name of NIC is as follow:
Stratus 82576 2-Port Copper Gigabit Adapter
(3) Select the [Link speed] tab, and configure value of [Speed and Duplex] to match
the hub.
(4) On network adapter property, click [OK] at dialog box.
(5) By the same procedure, configure another added NIC.
Add/delete protocol or services if needed. On [Network Connections], go to Local Area
connection property's dialog box.
TIPS:
[Network monitor] is recommended to add as one of the services.
[Network monitor] can monitor frames (or packets) sent and received a
computer that installs [Network monitor]. This is a useful tool to
analyze network failure. Refer to [Setup for failure managing] for the
installation procedure.
As to the setup of another network port, [Managing port], refer to the
online document [EDPRESSSCOPE Engine 2 User's guide] stored in
the NEC EXPRESSBUILDER DVD.
4.
Set a dual LAN configuration.
Refer to "DUPLEX LAN CONFIGURATION" on page 3-25.
Now the 1000BASE-T 2ch board set is installed.