Parameter File Creator - NEC Express5800 User Manual
Hide thumbs
Also See for Express5800:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
PARAMETER FILE CREATOR
"Parameter File Creator" is a tool to create [Parameter file] that is used for configuring the server
with the Express Setup (see Chapter 5 for details).
If you use the Parameter file created by the Express Setup and Parameter File Creator to operate the
setup, you can setup from the installation of OS to several utilities automatically except for a few
key input to confirm the specification. Also, you can install the system with the same specification
as before when re-installing the system. We recommend you to create [Parameter file] to setup the
servers from NEC EXPRESSBUILDER.
When using a floppy disk, a USB floppy disk drive is required.
IMPORTANT: You can not create [Parameter file] for Windows
Server 2003 x64 Editions.
NOTE: You can install Windows Server 2008/Windows Server 2003
without [Parameter file].
Also, you can modify/newly create [Parameter file] during the setup
with NEC EXPRESSBUILDER.
Installing and Using Utilities 6-7
Advertisement
Table of Contents
Troubleshooting
