NEC Express5800/R320a-E4 User Manual page 389

Wake On LAN does not function:
Is the AC power supplied to both CPU/IO modules?
→
If the AC power supplied to only one of the CPU/IO module, Wake On LAN
may become unavailable. Supply the AC power to both of CPU/IO modules..
Is the network adapter configured on OS?
→
On the OS, go to [Start] - [Management Tool] - [Computer management] and
select the Device Manager. Double click [Stratus emb-82576 2-Port Gigabit
Adapter #n] under the network adapter, then select the following option from
[Power Management] tab:
Wake on Magic Packet from power off state
This server uses the Locally Administered Address which you set in LAN
teaming as MAC address during OS running.
If does not wake this server with MAC address of each CPU/IO modules, you
should use the Locally Administered Address.
TIPS:
Wake On Magic packet is unavailable even it it is checked.
Is Hub/Client fixed as 1000M?
→
IMPORTANT:
For both Hub/Client, you cannot function Wake On LAN from standby with
the 1000M fixed configuration.
Do you happen to be sending Magic Packet to only one of the duplexed LAN?
→
Check the following configurations:
－Set the Hub as "Auto-Negotioation."
－Set the Client as "Auto-negotiate best speed."
If you use Wake On LAN under duplexed LAN, you need to send Magic
Packet to all of the duplexed LAN pair(s).
Troubleshooting 7-23