China Sensible Code Set Length 1 - Datalogic Gryphon I GBT4400 Product Reference Manual

Enter/Exit Programming Mode
China Sensible Code
Specifies one of the bar code lengths for
minimum label length if in
Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001 (pad with
zeroes).
See page 259
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
204
Set Length 1
Variable Length
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
China Sensible Code Length
Mode, or the first fixed length if in Fixed Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
CANCEL
Gryphon™ I GD44XX/GBT4400
China Sensible Code
Control. Length 1 is the
representing your