Wand Idle State; Transmit Noise - Datalogic Gryphon I GBT4400 Product Reference Manual

Wand Idle State

This feature specifies the level of the Wand output signal when the reader is idle.
$CWAID01(CR)
Wand Idle State = High

Transmit Noise

This option specifies the leading/trailing noise for the Wand interface.
DEFAULT
$CWATN01(CR)
Transmit Noise = Transmit leading noise
$CWATN03(CR)
Transmit Noise = Transmit leading and trailing noise
Product Reference Guide
TTL logic levels:
0V <= Low <= 0.7V
2.4V <= High <= 5.25V
$CWAID00(CR)
$CWATN00(CR)
$CWATN02(CR)
Transmit Noise = Transmit trailing noise
Enter/Exit Programming Mode
Wand Idle State = Low
DEFAULT
Transmit Noise = Disable
69