Enter/Exit Programming Mode
Send Control Characters
This feature Specifies how the reader transmits ASCII control characters to the host. Reference
Appendix E, Scancode Tables
Options are as follows:
Control Character 00 :
special keys are located from 0x80 to 0xA1.
Control Character 01 :
Key, special keys are located from 0x80 to 0xA1.
Control Character 02 :
0xFE are intended as an extended ASCII table (see "Microsoft Windows Codepage 1252" on
page 317).
DEFAULT
$CKBSC01(CR)
Wedge Send Control Characters = 01
56
for more information about control characters.
Characters from 00 to 0x1F are sent as control character Ctrl+Keys,
Characters from 00 to 0x1F are sent as control character Ctrl+Capital
Special keys are located from 00 to 0x1F and characters from 0x80 to
$CKBSC00(CR)
Wedge Send Control Characters = 00
$CKBSC02(CR)
Wedge Send Control Characters = 02
Gryphon™ I GD44XX/GBT4400