Maxicode Set Length 2 - Datalogic Gryphon I GBT4400 Product Reference Manual

Maxicode

Maxicode Set Length 2

This feature specifies one of the bar code lengths for
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length
Mode. Characters can be set from 0001 to 0145 characters in increments of 0001 (pad with
zeroes).
See page 259
$CMXL2
Select Maxicode Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
Product Reference Guide
for detailed instructions on setting this feature.
DEFAULT
Enter/Exit Programming Mode
Maxicode Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
Length 2 is 0145 Characters
Control. Length 2 is the
representing your
CANCEL
211