Micro Qr Code Set Length 1 - Datalogic Gryphon I GBT4400 Product Reference Manual

Enter/Exit Programming Mode
Micro QR Code
Specifies one of the bar code lengths for Micro QR Code Length Control. Length 1 is the
minimum label length if in
Mode. Characters can be set from 0001 to 0035 characters in increments of 0001 (pad with
zeroes).
See page 259
$CMQL1
Select Micro QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
222
Set Length 1
Variable Length
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Mode, or the first fixed length if in Fixed Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
CANCEL
Gryphon™ I GD44XX/GBT4400
Micro QR Code
representing your