Scanning Active Time; Stand Illumination Control - Datalogic Gryphon I GBT4400 Product Reference Manual

Scanning Active Time

This setting specifies the amount of time that the reader stays in scan ON state once the state is
entered. The range for this setting is from 1 to 255 seconds in 1-second increments. See
page 273
$CSNET05(CR)
Scanning Active Time = 5 seconds

Stand Illumination Control

Controls the illumination status while the reading mode is stand mode and the reader is
attempting to detect objects.
DEFAULT
$CSMIL01(CR)
Stand Illumination Control = ON
Product Reference Guide
in "References" for further description of this feature.
Enter/Exit Programming Mode
$CSNET03(CR)
Scanning Active Time = 3 seconds
DEFAULT
$CSNET08(CR)
Scanning Active Time = 8 seconds
$CSMIL00(CR)
Stand Illumination Control = OFF
$CSMIL02(CR)
Stand Illumination Control = Dim
97