Erase Batch Memory; Rf Batch Mode Transmit Delay - Datalogic Gryphon I GBT4400 Product Reference Manual

Erase Batch Memory

Use this bar code to erase any labels stored in batch memory.

RF Batch Mode Transmit Delay

Specifies the delay in 10 msec increments between transmitting labels stored in batch memory.
DEFAULT
$CBTTD05(CR)
RF Batch Mode Transmit Delay = 50 mS
$CBTTD32(CR)
RF Batch Mode Transmit Delay = 0.5 seconds
$CBTTDFA(CR)
RF Batch Mode Transmit Delay = 2.5 seconds
Product Reference Guide
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this bar code.
Erase Batch Memory
RF Batch Mode Transmit Delay = No Delay
$CBTTD0A(CR)
$CBTTD64(CR)
RF Batch Mode Transmit Delay = 1 second
Enter/Exit Programming Mode
$CBTTD00(CR)
RF Batch Mode Transmit Delay = 100 mS
237