Datalogic Website Support; The Bc40Xx™ Radio Base; Base Leds; Base Button - Datalogic Gryphon I GBT4400 Product Reference Manual

Introduction
The BC40xx™ Radio Base

Base LEDs

LEDs on the Gryphon Base provide information about the Base's status, as shown in
Figure 1
The following table describes the significance of each LED:
See Base Station Indications (GBT4400 Models ONLY) on page 289
LEDs.

Base Button

The Base contains a button which is used primarily to perform a paging function. Pressing the
button causes a sound signal to be emitted by all scanners linked with this Base, as long as the
scanner is awake (see
Beeper Indicators on page
Datalogic Aladdin Software tool (available for free download from the Datalogic website). See
the Aladdin Online Help for details.
For the BT model, press quickly (less than one second) to initiate paging. Press and hold (longer
than one second) to enable radio linking. This will make the base discoverable from a BT
master.
12
. Gryphon Base LEDs
YELLOW LED
RED LED /
GREEN LED
LED
Power on / Data
Charging
Charge completed
Charging + Charge completed
Powerdown Timeout on page
88). The button can also be used to "force device connection" via the
BUTTON
STATUS
Yellow On = Base is powered
Yellow Blinking = Base receives data and 
commands from the Host or the Reader.
Red On = Battery charging is in progress.
Green On = the Battery is completely charged.
Red and Green Blinking together = the Reader is not
correctly placed onto the Base.
for more specific details on the
244) and reception is enabled (see
Gryphon™ I GD44XX/GBT4400
Figure 1.
LED and