Source Radio Address Delimiter Character; Direct Radio Autolink - Datalogic Gryphon I GBT4400 Product Reference Manual

General purpose handheld area imager bar code reader
Hide thumbs Also See for Gryphon I GBT4400:
Table of Contents

Advertisement

Source Radio Address Delimiter Character

This option specifies the delimiter character to be placed between the label data and radio
address when address stamping is enabled.
$CBTAD
Set Source Radio Address Delimiter Character
Make a mistake? Scan the CANCEL bar code to
abort and not save the entry string. You can then
start again at the beginning.
DEFAULT
This feature enables/disables the ability to link a wireless handheld to a base station without
scanning the Unlink label first.
DEFAULT
$CBTDL01(CR)
Direct Radio Link = Automatic Unlinking
Product Reference Guide
This feature only applies if "Source Radio Address Transmission" on
page 238 is enabled.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
00 = No Delimiter Character

DIRECT RADIO AUTOLINK

Enter/Exit Programming Mode
Appendix D, Keypad
~
CANCEL
$CBTDL00(CR)
Direct Radio Link = Unlink Label Required
representing your
239

Advertisement

Table of Contents
loading

Table of Contents