China Sensible Code Set Length 1 - Datalogic QuickScan QM24 Series Product Reference Manual

Enter/Exit Programming Mode
China Sensible Code
Specifies one of the bar code lengths for
Length 1 is the minimum label length if in
Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001
(pad with zeroes).
See page 243 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
186
Set Length 1
China Sensible Code Length Control on page
0001 = Length 1 is 1 Character
DEFAULT
Variable Length Mode, or the first fixed length if in
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
~
QuickScan™ I QD24XX/QBT24XX/QM24XX
185.
representing
CANCEL