Multiple Labels Ordering By Code Symbology - Datalogic Gryphon I GBT4400 Product Reference Manual

Multiple Labels Ordering by Code Symbology

This feature Specifies the transmission ordering by symbology type, when Multiple Labels per
Frame is enabled.Up to six symbologies can be selected. Zeroes must be added to pad the string
to 12 characters if not using all six symbologies.
The labels are ordered first as specified in the output mask. Labels present in the volume but not
specified will be transmitted as unspecified symbologies in random order as allowed by the
reading time sequence. For each label decoded in the volume the reader signals the standard
beeper and LED indications.
To specify the symbology order:
1. Determine the symbologies and order you want to specify.
2. Use
3. Go to
4. Scan the bar code: "SELECT SYMBOLOGIES FOR MULTIPLE LABELS ORDER-
5. Scan the appropriate two alphanumeric characters from the keypad in
6. Scan zeroes if needed to make a 12-character string.
7. When finished, scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Pro-
This completes the procedure. See
Table 44. Multiple Labels Ordering by Code Symbology Examples
STEP ACTION
1 Desired symbology
2 Hex equivalent from
3
4
Scan Two Characters From
5
Appendix D, Keypad
RESULT
6
Table 45
Product Reference Guide
Table 45 on page 278
page 104 and scan the ENTER/EXIT PROGRAMMING MODE bar code to
enter Programming Mode.
ING".
pad, that represent the desired character/value in step 2 above.
gramming Mode.
Code 39
Table 45
24
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT SYMBOLOGIES FOR MULTIPLE LABELS ORDERING
'2' and '4'
0x240E0C4E0000
Scan ENTER/EXIT PROGRAMMING MODE
shows the hex value associated with each symbology.
to find the hex values for up to six symbologies.
Table 44 for some examples of how to set this feature.
EXAMPLES
Data Matrix
0E
'0' and 'E'
Scanning Features
Appendix D, Key-
Code 128 Aztec
0C 4E
'0' and 'C' '4' and 'E'
277