Gs1 Databar™ Expanded Set Length 2 - Datalogic Gryphon I GBT4400 Product Reference Manual

1D Code Selection
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the bar code lengths for
Control. Length 2 is the maximum label length if in
length if in
can be set from 1 to 74 characters. A setting of 0 specifies to ignore this length (only one fixed
length).
Table 18
setting this feature.
Table 18. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Fixed Length Mode. Length includes the bar code's data characters only. The length
provides examples for setting Length 2. See
00 (ignore sec-
ond length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
74 = Length 2 is 74 Characters
DEFAULT
Enter/Exit Programming Mode
GS1 DataBar™ Expanded Length
Variable Length
page 259 for detailed instructions on
EXAMPLES
07 Characters 52 Characters
'0' and '7' '5' and '2'
~
CANCEL
Mode, or the second fixed
74 Characters
'7' and '4'
181