Table 25. Intercharacter Delay Setting Examples
STEP
ACTION
1
Desired Setting
Divide by 10 (pad with leading
2
zeroes to yield two-digits)
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
ACK NAK Options
This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol.
When configured, the reader and/or host sends an "ACK" when it receives data properly, and
sends "NAK" when the data is in error.
Options are:
•
•
•
•
Product Reference Guide
50ms
05
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT INTERCHARACTER DELAY SETTING
'0' and '5'
Scan ENTER/EXIT PROGRAMMING MODE
Disable
Enable for label transmission — The reader expects an ACK/NAK response from the host
when a label is sent.
Enable for host-command acknowledge — The reader will respond with ACK/NAK
when the host sends a command.
Enable for label transmission and host-command acknowledge
EXAMPLES
150ms
600ms
15
60
'5' and '0'
'6' and '0'
RS-232 Parameters
850ms
85
'8' and '5'
249