Aztec Code Set Length 2 - Datalogic Gryphon I GBT4400 Product Reference Manual

Enter/Exit Programming Mode

Aztec Code Set Length 2

This feature specifies one of the bar code lengths for
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad
with zeroes).
See page 259
$CAZL2
Select Aztec Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again at
the beginning.
202
for detailed instructions on setting this feature.
DEFAULT
Aztec Code Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
Length 2 is 3,832 Characters
Aztec Code
Control. Length 2 is
representing your
CANCEL
Gryphon™ I GD44XX/GBT4400