Scanning Active Time
This setting specifies the amount of time that the reader stays in scan ON
state once the state is entered. The range for this setting is from 1 to 255
seconds in 1-second increments. See
description of this feature.
Scanning Active Time = 5 seconds
Stand Illumination Control
Controls the illumination status while the reading mode is stand mode and
the reader is attempting to detect objects.
DEFAULT
Stand Illumination Control = ON
Product Reference Guide
Enter/Exit Programming Mode
page 295
in "References" for further
Scanning Active Time = 3 seconds
DEFAULT
Scanning Active Time = 8 seconds
Stand Illumination Control = OFF
Stand Illumination Control = Dim
73