Scanning Active Time; Stand Illumination Control - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

Scanning Active Time

This setting specifies the amount of time that the reader stays in scan ON
state once the state is entered. The range for this setting is from 1 to 255
seconds in 1-second increments. See
description of this feature.
$CSNET05(CR)
Scanning Active Time = 5 seconds

Stand Illumination Control

Controls the illumination status while the reading mode is stand mode and
the reader is attempting to detect objects.
DEFAULT
$CSMIL01(CR)
Stand Illumination Control = ON
74
page 297 in "References" for further
$CSNET03(CR)
Scanning Active Time = 3 seconds
DEFAULT
$CSNET08(CR)
Scanning Active Time = 8 seconds
$CSMIL00(CR)
Stand Illumination Control = OFF
$CSMIL02(CR)
Stand Illumination Control = Dim
PowerScan™ PD9530/PBT9500/PM9500