Hold - Tadiran Telecom T207M User Manual

Hold

A calling party can be placed on hold while another call is made. The held party can hear one of the following: music, reorder
tone, busy tone or no sound at all as defined system-wide.
Call Hold is accessible via
or HOLD to place the second party on hold.
During a call, press
[Hold]
The soft key is shown with a bullet next to it, indicating that a call has been placed on hold at your station. A *HOLD*
[Hold]
message appears on the top line to remind you that a call is held at your station. The HOLD LED is lit and
Retrieving the call from Hold:
Press the flashing key to connect or:
LOOP
1. Press or .
[Hold] HOLD
2. Choose . If more than one party has been placed on hold, scroll between names by using
[Conn]
3. The held calls are returned in "first in/first out order".
If you do not return to the call on hold within a predetermined amount of time, the call will automatically return to you.
If your telephone is defined (by the system administrator) as Hard
placing a call on hold. When Hard Hold is activated on a call, your station will be considered busy for additional
incoming calls; however, outgoing calls can still be made.
Station Telephony Features
Hold
or HOLD.
[Hold]
10:50
Page 1
→ PgQ
CALL HOLD
Page 2
→
Next
26 May 2007 Company xyz
user name station number
[Hold]
Xfer
Name
Conn
, the message CALL ON HOLD appears after
HOLD
132
Mute
LOOP
.
[Next]
T207M / T208M User Guide
flashes.