Hold - Tadiran Telecom T207M User Manual

Hold

A calling party can be placed on hold while another call is made. The held party can hear either music or tick-tone as defined
system-wide. Call Hold is accessible via
NOTE! You can also program a HOLD button via your Coral Sea Softswitch portal.
During a call, press
[Hold]
The soft key is shown with a bullet next to it, indicating that a call has been placed on hold at your station and that you
[Retr]
can press this button to retrieve the call. A *HOLD* message appears on the top line to remind you that a call is held at your
station. The preprogrammed
Retrieving the call from Hold:
Press the flashing key to connect or:
LINE
1. Press or . The
[Retr] HOLD
2. The held calls are returned in "first in/first out order".
If you do not return to the call on hold within a predetermined amount of time, the call will automatically return to you
with the RECALL NAME message. Press
Station Telephony Features
Hold
or HOLD.
[Hold]
ANSWER name or number
Page 1
→ Mute
Page 2
→ •Retr
or HOLD to place the second party on hold.
or Line DSS key flashes.
LINE
Reconnect held party [Name or Number]
[Aswr]
[Hold]
Dsct
*HOLD*
CaIL Fwd
to return to the call or
[Dsct]
62 T200M Series User Guide (Coral Sea Softswitch)
Xfer
Rdil
message is displayed.
to cancel the hold.