Boss Groups: Exclusive Hold - Tadiran Telecom FlexSet 280S User Manual

Boss Groups: Exclusive Hold

As a Boss Group member, you can put your telephone into Exclusive Hold mode. This ensures that a call you place
on hold can be retrieved only at the station where Exclusive Hold was originally placed. If Exclusive Hold is
cancelled, the call put on hold can be retrieved by any other member of your Boss Group, by pressing the winking
key.
LINE
The feature can be utilized for a specific call or for all calls.
Operating Exclusive Hold for all calls
To operate this feature for all calls, see page 161.
Operating Exclusive Hold for current call
You may override the station Exclusive Hold setting on a call-by-call basis. Thus, if your station is in Exclusive Hold
mode, you may remove the Exclusive Hold restriction and allow others to pick up your held call; alternatively if your
station is not in Exclusive Hold mode, you may apply Exclusive Hold to a specific call.
This is done by pressing [ExHold] during a call before pressing the hold key. Press this key to toggle the feature on and
off. This key can be pressed as many times as necessary.
If your telephone is not in Exclusive Hold mode for all calls, press [ExHold] before you press [Hold].
Press [Hold] to place a call into Exclusive Hold. The
call will only be retrievable from your station.
Once Exclusive Hold is defined for your station (all calls) the Exclusive Hold key LED remains illuminated, and a
bullet is displayed next to [ExHold], even if the key is pressed to temporarily override the Exclusive Hold feature.
However, when your call is completed the telephone will return to the permanent status, as previously defined for all
calls.
Station Features
Boss Groups: Exclusive Hold
on hold will remain steady on at all other FlexSets, and the
LINE
62 FlexSet 120S/280S User Guide