Tadiran Telecom T207M User Manual page 49

During a Break In
After dialing a busy destination number and choosing
can hear your voice. You may press
following soft keys.
Transfer is used to converse in private with the caller party (from the original 2-way call). The called party is
[Xfer]
released. See
or MUTE Mute can be activated during a Break In to mute your side, allowing you to listen to the conversation but not
[Mute]
speak. When this feature is activated by
and MUTE LED is lit red. The mute feature deactivates the microphone for your speakerphone and
[Mute]
handset or headset. Press the toggle key again to reactivate the microphone (see
Forced Release enables an authorized user to end the conversation and release two ports actively connected
[fRls]
to each other.
Destination is used to converse, in private, with the 3
[Dest]
3-way conversation.
Source is used to converse, in private, with the called party. The 3
[Src]
way conversation.
Calls Waiting can be used to view the number of calls waiting for you during a conversation.
[Wait]
Number is used to briefly display the two port dial numbers instead of the names.
[Num]
Speaker/Headset toggles between speaker and the handset operation. See
[S/HS]
Headset on page 23
Operating the Phone
Making Internal Calls
[BrkI]
or hang up in order to allow the continuation of the call, or press on one of the
SPKR
B TO called number or name
↓→ Xfer
Mute
Transfer (Xfer) on page 196
.
(see
Upon Hearing Busy Tone on page 34)
fRls Dest
.
or MUTE on/off toggle switch, a bullet appears to the left of
[Mute]
rd
party. The called party is put on hold. Press again for
rd
38
, both conversing parties
page 155).
party is put on hold. Press again for 3-
Using the Speakerphone or
T207M / T208M User Guide