Tadiran Telecom T207M User Manual page 72

Primary Login Group. If you are a member of more than one ACD group, you can use this feature to define
[pLog]
one of those groups as your primary group. Once you have logged into your primary group, waiting calls will
always be routed to you from this group first.
1. Press
[pLog]
2. Dial the primary ACD group number.
3. Choose
4. If you have not loaded your ACD 4-digit ID number, the NO ID, LOGIN message appears. Load your
ID number.
If this feature is activated, a bullet appears next to
NOTE! If no group is defined as primary or if log out is defined for the primary group, then the first group
you logged into (previous page) is defined as primary by system.
Release/Resume. Press
[R/R]
again to rejoin your group/s. When released a bullet appears next to
The top line will show RELEASED ALL when you leave your group/s and RESUMED ALL when you rejoin.
You will be automatically released from all groups of which you are a member if you do not answer a call
within a predetermined time (defined system-wide).
Release UCD is used to temporarily exit (or rejoin) the UCD group of which you are a member.
[rUCD]
1. Press
[rUCD]
2. Dial your UCD Hunt group number.
3. Press
[Set]
4. Listen for the confirmation tone.
NOTE! You can preprogram a feature key for use as a toggle key. To program a Release/Resume UCD#
key, use feature code #1991 followed by the specific UCD group number.
Station Telephony Features
ACD and UCD Hunt Groups
.
to join the group or [Canc] to leave the group.
[Set]
to temporarily leave all the ACD/UCD groups of which you are a member. Press
[R/R]
.
to exit or [Canc] to rejoin.
.
[pLog]
[R/R]
61
.
T207M / T208M User Guide