Tadiran Telecom T207M User Manual page 23

Component
Programmable Provides a shortcut to a string of dial commands or telephone number, by using a pre-defined key,
Keys (DSS) known as a DSS (Direct Station Selection) key. Instead of dialing a number or dial commands, this
can be done by pressing the programmed key.
Several dial commands, in a series, may be programmed into one DSS key - useful for one-button
speed dialing, voice response and voice mail system access, and other complex dialing patterns.
There are Four user programmable keys on the T207M and T208M. A green LED lights when a key is
activated. See
Fixed Function Nine keys for basic features: MSG, CONF, DIR, HEADSET, XFER, REDIAL, HOLD, MUTE, SPKR
Keys (see
Fixed key OK (see
Navigator Keys
on the display. Used for selecting without choosing or activating the option. See
Navigator Keys on page
Soft keys Located below the display panel, keys used to directly activate the feature option. See
Telephony Features on page
Volume Button Adjust the volume (see
• Ringer - from idle or while the phone is ringing (see
• Speaker/Handset/Headset - during a conversation (see
page
TEM Optional expansion module used to add additional programmable buttons to the phone. These
programmable buttons may be configured only from the phone or its web page.
2 x 22 programmable buttons.
Use the shift left and right buttons to enable another 22 buttons. See
Phone Overview
Component Descriptions
Programming: Feature Keys on page
page 20).
Using the Fixed and Navigator Keys on page
and
17.
19.
Volume Adjustment on page
23)
Description
167.
17).
Up/down, right/left arrows used to move from one option to another
28) of the following components:
Ring Adjustment on page
12
Using the Fixed and
29)
Using the Speakerphone or Headset on
page 170.
T207M / T208M User Guide
Using the