Tadiran Telecom T207M User Manual page 62

Setup is used to program your station for specific feature activation. See
[fSet]
Malicious Call Trace is used to record the next x (a system-defined variable) calls to your phone. A list of
[Trc]
these calls can be sent to a printer or terminal. See
.
page 133
Attendant Call Trace is relevant for Attendant Console only. Use Attendant Malicious Call Trace to set or
[aTrc]
print a call trace for any station. See
Room Status (or Canned Messages) is used to toggle the room status definition (or canned message) of
[Room]
your station on or off. See
Attendant Room Status (or Attendant Canned Messages) is relevant for Attendant Console only. Use the
[aRS]
Attendant Room Status feature to toggle the room status definition (or canned message) of any station on or
off. See
Room Status on page 217
Boss Group: Call Forward enables you to define the conditions under which incoming calls to your Boss
[bFwd]
Group are forwarded to another destination. See
Attendant Call Forward is relevant for Attendant Console only. Used by the attendant to program stations,
[aFwd]
boss groups and ACD/UCD groups so that incoming calls ring at another destination. See
.
page 211
Call Charge is relevant for Attendant Console only. This attendant feature shows the charges accumulated
[Chrg]
per station. The attendant may reset and print the Charge Table content. See
Station Setup is relevant for Attendant Console only. Station Setup allows the attendant to define stations for
[sSet]
specific feature activation. See
Operating the Phone
During Idle
Individual Remote System Services (IRSS) - Freedom on
Malicious Call Trace on page 216
Room Status on page 184
or
Canned Messages on page 213
Boss Groups: Call Forwarding on page 71
Station Setup Features on page 223
51
Setup on page 237
.
or
Canned Messages on page 87
.
Call Charge on page 221
.
.
.
.
Call Forward on
.
T207M / T208M User Guide